IAM-B1A0111 Speaker #1. General Electrical Failures. Circuit Short To Ground (2012): Fault-Tracing: Fault-Tracing
Check if similar diagnostic trouble codes are stored in one or any of the other loudspeakers.
Are there similar DTCs in several loudspeakers?
- YES
Refer to FAULT-TRACING
- NO
Refer to FAULT-TRACING
Rectify in the following order:
- Check the connectors to the control module. Check for contact resistance, loose connections and oxidation.
- Check the connector to the loudspeaker. Check for contact resistance, loose connections and oxidation.
- Check relevant signals using wiring diagram , signal specification and breakout box .
- Perform a visual inspection of the cable between the control module and loudspeaker. If necessary, install a new cable.
- Check the loudspeaker.
Other information
- see LOCATION OF COMPONENTS
- see CHECKING WIRING AND TERMINALS
- see CHECKING THE SUPPLY VOLTAGE/GROUND TERMINAL
- see SIGNAL DESCRIPTION, INTEGRATED AUDIO MODULE (IAM)
- see CONNECTING THE BREAKOUT BOX
- see JOINING CABLES
- see LOUDSPEAKER, SIDE DOOR FRONT
- see LOUDSPEAKER SIDE DOOR, REAR
Has the fault been remedied?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to FAULT-TRACING
Rectify in the following order:
- Check the connector to the loudspeaker. Check for contact resistance, loose connections and oxidation.
- Check the connectors to the control module. Check for contact resistance, loose connections and oxidation.
- Check relevant signals using wiring diagram , signal specification and breakout box .
- Perform a visual inspection of the cable between the control module and loudspeaker. If necessary, install a new cable.
- Check the loudspeaker.
Other information
- see LOCATION OF COMPONENTS
- see CHECKING WIRING AND TERMINALS
- see CHECKING THE SUPPLY VOLTAGE/GROUND TERMINAL
- see SIGNAL DESCRIPTION, INTEGRATED AUDIO MODULE (IAM)
- see CONNECTING THE BREAKOUT BOX
- see JOINING CABLES
- see LOUDSPEAKER, SIDE DOOR FRONT
- see LOUDSPEAKER SIDE DOOR, REAR
Has the fault been remedied?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to FAULT-TRACING
Rectify in the following order:
- Use VIDA Vehicle communication (Volvo scan tool) . Read off the parameters, activate components and functions, carry out quick tests and checking routines for the diagnostic trouble codes to identify the fault.
- Check relevant components according to Component specifications .
- Remedy as necessary.
- Continue
Refer to INFORMATION