Diagnostic Trouble Code (DTC) Information IAM-B121C49
Condition
The Integrated Audio Module (IAM) can detect faults on the hard disk after a check procedure has been performed.
The diagnostic trouble code is stored if the control module detects:
- Internal fault on the hard disk
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Self-test
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Damaged integrated audio module (IAM).
Fault symptom[s]
- Navigation/Voice guidance does not work
- Navigation/Locations cannot be stored/disappears
- Navigation/Does not work
- Navigation/Other navigation problems