Diagnostic Trouble Code (DTC) Information CEM-U201495
Condition
The central electronic module (CEM) checks the internal components in the control module.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Incorrect hardware has been detected.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Start-up of the control module.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None
Possible Source
- Incorrect hardware installed.
Fault symptom[s]
- Turn signals/Front turn signal does not work
- Turn signals/Rear turn signal does not work
- Driving/Poor performance/lacks power
- Instrument- /button lighting/Does not work
- Gauges/Other gauge problems