Diagnostic Trouble Code (DTC) Information PBM-U210054
Condition
Park Brake Module (PBM) has an integrated angle sensor. Control module checks the signal from the angle sensor.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Angle sensor is not calibrated.
The diagnostic trouble code is also generated if the control module detects that:
- Installation check not carried out.
- Active service mode.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Calibration sequence not carried out.
- Installation check not carried out.
- Service mode is activated.
Fault symptom[s]
- Warning lights and chimes/Parking brake indication/no indication
- Text window and warning symbol/Yellow symbol and text message
- Electrical parking brake; Reduced Functionality