Diagnostic Trouble Code (DTC) Information IAM-B1A0112

Condition

The Integrated Audio Module (IAM) checks the signal in the signal cable to the loudspeaker in the left-hand front door.

The diagnostic trouble code (DTC) is stored if the control module detects that:

The signal in the signal cable to the loudspeaker in the left-hand front door is too high.

The control module's test for the diagnostic trouble code (DTC) starts in the event of:

Start-up of the control module.

NOTE:

The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Fig 1: Identifying Loudspeaker

Courtesy of VOLVO CARS CORPORATION

Substitute Value

None.

Possible Source

Short-circuit to supply voltage in the signal cable between the control module and the loudspeaker in the left front door.

Fault symptom[s]

No sound from loudspeakers