Diagnostic Trouble Code (DTC) Information HCM-U054383
Condition
The Headlamp Control Module (HCM) both transmits and receives information via a standardized serial communication method - LIN (Local Interconnect Network). The control module checks the communication with the Right headlamp control unit (RHCU).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Received message does not correspond with expected message.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Communication interference.
Fault symptom[s]
- Active Bi-Xenon light; No Functionality
- Automatic vertical aim control does not work
- Text window and warning symbol/Text message