Diagnostic Trouble Code (DTC) Information AUD-B1A0611
Condition
The Audio module (AUD) checks the signal in the signal cable to the central loudspeaker.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The signal is too low in the signal cable to the center loudspeaker.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated control module.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Short-circuit to ground in the signal cable between the center loudspeaker and the control module.
Fault symptom[s]
- No sound from loudspeakers