Diagnostic Trouble Code (DTC) Information FSM-C11324B
Condition
Forward Sensing Module (FSM) checks external components connected to control module.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The visual collision warning indicator has over heated.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated indicator.
- Control module supplied with power for at least 5 seconds.
- The system voltage is greater than 8.0 V.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Ambient temperature too high.
Fault symptom[s]
- Warning lights and chimes/Front monitoring/Active safety indication/no indication
- Warning lights and chimes/Bulb failure indication/no indication