Diagnostic Trouble Code (DTC) Information KVM-B10C91F
Condition
The diagnostic trouble code (DTC) is stored if the control module detects that:
- An electrical fault has occurred in the remote control or in the cables to the antenna.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Engine on and vehicle speed over 19 km/h.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Open-circuit or short-circuit to ground in the signal cable.
- Short-circuit to supply voltage in the signal cable.
- Broken antenna.
Fault symptom[s]
- No keyless functionality