Diagnostic Trouble Code (DTC) Information
Condition
The driver door module/passenger door module (DDM/PDM) checks the lock motors in the front doors. The control module receives an indication of the status of the lock motors (locked/unlocked).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Locking and unlocking are active at the same time.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Internal fault.
Fault symptom[s]
- Does not lock/unlock one door