Diagnostic Trouble Code (DTC) Information
Condition
The control module of the front left door supplies power to the lamp in the left door mirror.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Signal too low from the output.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated lamp.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Short-circuit to ground in the power supply cable.
Fault symptom[s]
- Door mirror light does not work