Diagnostic Trouble Code (DTC) Information
Condition
The driver door/passenger door module (DDM/PDM) checks the signal from the central lock button.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Button has been held down for more than two minutes.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Button has jammed in the pressed in position.
- Damaged control panel.
Fault symptom[s]
- Central locking does not operate