Checking Relay

Fig 1: Identifying Ignition Switch OFF Position

GLL101045

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off.
Check that the "daytime lamp" relay is correctly installed. Also check the relay terminal, in particular terminal #2. Check for a short-circuit to supply voltage.

Remedy as necessary.

Try a new relay if no faults are found.

Other information:
- To connect the breakout box, see Connecting the breakout box
- To replace the relay, see Central electronic module (CEM), replacing
- For further information about the fuses and relays, see the Wiring Diagram
- See Checking wiring and terminals
Fig 2: Identifying Voltmeter
Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
Refer to Verification