Calibration DSTC

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

For the DSTC function to operate after a repair, the ABS control module with DSTC must be calibrated. This means that the control module adjusts the signals from the unique sensors in the DSTC system.

When replacing:

the ABS control module, the data for the steering wheel angle sensor module (SAS), brake pressure sensor and lateral acceleration sensor must be calibrated
Brake pressure sensor data for the brake pressure sensor must be calibrated
The lateral acceleration sensor, data for the lateral acceleration sensor must be calibrated.

Generally calibration must be carried out after repair to a component which affects the position of the steering wheel in relation to the position of the front wheels.

Calibration must be carried out according to instructions in VIDA vehicle communication or manually via a test drive.