Removing The Position Sensor

Fig 1: Camshaft Position Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove 

• the engine stabilizer brace between the suspension turrets
• the cable clamp on the engine stabilizer brace

  Disconnect the pipe between the air cleaner (ACL) and the turbocharger at its upper end.

• the hoses from the hose bracket (at the left front of the engine)
• the hose bracket (at the left front of the engine)

  Disconnect the connector.

  Disconnect the wiring from the hooks on the bracket on the cylinder block (left front).

• the sensor.