Checking wiring and connectors
Check the cables between connector terminal #7 for the fuel level sensors and control module terminal #A08 (#A8). Check for an intermittent short-circuit to ground. Check for an intermittent open-circuit.
Check the ground lead between control module terminal #A10 (#A10) and fuel level sensor connector terminal #6. Check for an intermittent open-circuit.
Check the cables between the left and right fuel level sensors. Check for an intermittent open-circuit.
Other information:
- For further information about signals and other values, see Signal specification
- To connect the breakout box, see Connecting the breakout box
- To access the control module, see Integrated relay/fuse box cargo compartment/rear electronic module, replacing
- To access the fuel level sensors, see Left fuel gauge sensor and Right side fuel pump with level sensor
- See Checking wiring and terminals. Intermittent faults .
- Continue
Refer to Information