Checking the Cable

Check the cable between central electronic module (CEM) terminal #14A and windshield wiper relay 2/90 terminal #2. Check for an open-circuit.

Also check the connector. Check for an open-circuit.

Remedy as necessary.

Other information: 

• To connect the breakout box, see Connecting the Breakout Box
• For information about signals, see Signal Specification
• See Checking Wiring And Terminals

Fig 2: Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 4: Identifying Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

Refer to Verification