Faulty Signal (2008, 2009, 2010): Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reinstall the connectors, components etc.
• Start the engine.

  Read off the fault status of the camshaft position (CMP) sensor.

  If the function is correct, the camshaft position (CMP) sensor fault status must be "No fault detected".

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 4: Camshaft Position Sensor

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Has the fault been remedied? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION