Checking Shift Solenoid S5

Check the status of solenoid S5. The status must switch between OFF and ON.

The fault is permanent if the status does not change.

If the status changes, this is an indication that the fault was present previously but is not active at the moment, example intermittent fault.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA (Volvo Scan Tool)

Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Shift Solenoids S1, S2, S3, S4 And S5

Courtesy of VOLVO CARS CORPORATION

Refer to CHECKING THE WIRING AND COMPONENT