Checking The Wiring And Component
WARNING: This page is about a different variant/trim than selected.
The probable cause of the diagnostic trouble code (DTC) was the transmission being subjected to high loads and high temperatures. It is therefore important to change transmission fluid and to check the function of the transmission.
Change the oil. See TRANSAXLE OIL
- Continue
Check the signal cable between the oil temperature sensor in the transmission and the transmission control module (TCM) terminal #C14 (#14). Check for a short-circuit to ground.
Remedy as necessary
Other information:
- see CONNECTING THE BREAKOUT BOX
- see SIGNAL SPECIFICATION
- To disconnect the transmission control module (TCM), see TRANSMISSION CONTROL MODULE (TCM)
- see COVER, CONTROL SYSTEM
- see CONTENTS
- Continue
Refer to VERIFICATION