Checking Shift Solenoid S1

Check the status of solenoid S1. The status should switch between OFF and ON.

The fault is permanent if the status does not change.

If the status changes, this indicates an intermittent fault, i.. he fault was present previously but is not active at the moment.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Shift Solenoids S1, S2, S3, S4 And S5

Courtesy of VOLVO CARS CORPORATION

Refer to CHECKING THE WIRING AND COMPONENT