Diagnostic Trouble Code (DTC) Information SWM-0200

Condition 

Fig 1: Identifying Steering Wheel Module (SWM)

Courtesy of VOLVO CARS CORPORATION

The steering wheel module (SWM) carries out continuous checks on the system components. The diagnostic trouble code (DTC) is stored if an internal fault is registered in the steering wheel angle sensor.

The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute Value 

• Active yaw control is blocked.

Possible Source 

• Internal fault in the steering wheel module (SWM).

Fault symptom[s] 

• The stability control system does not function
• Traction control warning lamp lit.