Intermittent Fault

HINT: The status of the diagnostic trouble code (DTC) indicates that the brake control module (BCM) has previously registered a fault but that the fault is not active. 

Check the connectors for the brake control module (BCM) and the steering wheel module (SWM). Check for contact resistance. Check for oxidation.

Check that the communication wiring is not too close to a source of interference such as a carphone etc.

Remedy as necessary.

Other information 

• see CONNECTING THE BREAKOUT BOX
• see CONNECTING THE BREAKOUT BOX
• see CONTENTS .

• Continue 

  Refer to INFORMATION