Checking The Wiring

Fig 1: Identifying Ignition In Off Position

GLL101046

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Connectors

GLL101072

Courtesy of VOLVO CARS CORPORATION

Ignition off.
Unplug the LED connector and check that the LED is intact.

Check the signal cable between the camera and the connector LED terminal #1. Check for an open-circuit.

Check the signal cable between the camera and the connector LED terminal #3. Check for an open-circuit.

Remedy as necessary.

Other information
- see SIGNAL SPECIFICATION
- see CHECKING WIRING AND TERMINALS
- see REAR VIEW MIRROR EXTERNAL
Fig 3: Identifying LED Terminal
Courtesy of VOLVO CARS CORPORATION

Fig 4: Identifying Sideview Mirror Blind Spot Indication System (BLIS)
Courtesy of VOLVO CARS CORPORATION

Continue
Refer to VERIFICATION