Faulty Signal (2007): Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

• Ignition off
• Reinstall the connectors, components etc.
• The engine must be at idle speed to perform the diagnostic.

  Read off the diagnostic status and the fault status for the diagnostic trouble code (DTC).

  Check that the diagnostic is "Completed" and that the fault status is "No fault detected". The function is faulty if the fault status is "Fault found".

  Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA (Volvo Scan Tool)

  Courtesy of VOLVO CARS CORPORATION

Is the fault status "No fault detected"? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION