Diagnostic Trouble Code (DTC) Information ECM-2B00
Condition
The engine control module (ECM) checks the signal from the fuel temperature sensor.
The diagnostic trouble code (DTC) is stored if the engine control module (ECM) registers a fault in the signal from the fuel temperature sensor.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.
Substitute Value
- The fuel temperature is set to a calculated value.
Possible Source
Signal too high
- Short-circuit to supply voltage in the signal cable
- Damaged fuel temperature sensor.
Signal too low
- Short-circuit to ground in the signal cable
- Open-circuit in the signal cable
- Damaged fuel temperature sensor.
Fault symptom[s]
- None.