Checking The Component And Wiring

Check the cable between engine control module (ECM) terminal #A67 (#B7) and engine coolant temperature (ECT) sensor terminal #1. Check for a short-circuit to ground.

Remedy as necessary.

Other information 

• see CONNECTING THE BREAKOUT BOX
• see SIGNAL SPECIFICATION
• see ENGINE COOLANT TEMPERATURE SENSOR (ECT)
• see CHECKING WIRING AND TERMINALS

Fig 1: Identifying 2-Bit Connector

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA (Volvo Scan Tool)

Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Engine Coolant Temperature (ECT) Sensor

Courtesy of VOLVO CARS CORPORATION

• Continue 

  Refer to VERIFICATION