Connecting The Breakout Box

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.

Special tools:

see 9511503

see 9511428

Fig 1: Breakout Box

Courtesy of VOLVO CARS CORPORATION

Ignition off
Remove fuses 11C/21, 11C/25 and 11C/32 from the fusebox in the passenger compartment
Expose the central electronic module (CEM):
- For -2004, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING
- For 2005-, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .

Connect adapter see 9511503 to the control module connector. Connect breakout box see 9511428 to the adapter.

Disconnect the breakout box in reverse order.

NOTE: Before the control module can be checked and measurements taken, the removed fuses must first be installed.

For further information about signals and other values, see SIGNAL SPECIFICATION .