Start Of New Driving Cycle

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Before the diagnostic trouble code' status is read out it is important to start a new driving cycle.

Ignition on.
Restart Steering wheel angle sensor module (SAS) by pressing on the symbol for VCT2000 in VIDA (Volvo scan tool) and press start.

NOTE:

This action may mean that diagnostic trouble codes are stored in other control modules that are dependent on continuous information of current steering wheel angle from Steering wheel angle sensor module (SAS) via CAN. These diagnostic trouble codes shall be deleted without action.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS CORPORATION

Continue
Refer to CHECKING THE STATUS