Fault-Tracing Information
Checking components and connections
Check that the components included in the occupant weight sensor (OWS) system are correctly installed.
If no fault is found, replace the occupant weight sensor (OWS).
Replacing a component
- Ignition off, wait for 15 seconds.
- Replace the occupant weight sensor (OWS).
NOTE:
After replacing the occupant weight sensor (OWS), the occupant weight sensor (OWS) must be calibrated.
Other information:
- see CALIBRATING THE OCCUPANT WEIGHT SENSOR (OWS)
- see FRONT PASSENGER WEIGHT SENSOR
- Occupant weight sensor (OWS): see SIGNAL SPECIFICATION
- Supplemental restraint system module (SRS): see SIGNAL SPECIFICATION
- Continue
Refer to VERIFICATION