Diagnostic Trouble Code (DTC) Information IAM-B1A5613
Condition
The Integrated Audio Module (IAM) checks the signal on the signal cable between the aerial amplifier and the window aerials.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Signal missing.
The control module's test for the diagnostic trouble code (DTC) starts when:
- The control module is switched off.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Open circuit on signal cable between aerial amplifier and window aerials.
Fault symptom[s]
- Poor radio reception