Connecting The Breakout Box
- Ignition off
- For information on releasing the forward sensor module (FSM) connector, see COLLISION WARNING CONTROL MODULE (2007) or COLLISION WARNING CONTROL MODULE (2008-2012)
Connect the breakout box see 9511428 and cable harness see 9511499 to the adapter.
Forward Sensing Module (FSM)
- Connect the adapter see 9512984 to control module connector C1.
- For connector C1, terminals #C1:1-#C1:30 correspond to terminals #1-#30 on the breakout box.
NOTE:
Before the control module can be checked and readings taken, the removed fuses must first be refitted.
Other information
- For further information on signals and other values, see SIGNAL SPECIFICATION