Signal missing: Verification: Verification
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off
- Reinstall the components, reconnect the connectors etc.
- Ignition on
- Depress the brake pedal. Move the gear selector lever to "MAN " (manual).
- Move the gear selector lever to +. Check that gear selection is updated in the display in the combined instrument panel.
- Move the gear selector lever to -. Check that the gear selection is updated.
Is the function OK?
- YES
VERIFIED: Troubleshooting has been completed.
- NO
Refer to Information