Removing the Control Module

Fig 1: Disconnecting Control Module Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Unscrew the screw holding the connector so that it is free of its threads. Check that the screw is free with your fingers.

Disconnect the connector. Use an open spanner and a support as shown.

NOTE: Do not damage the pins. Always check that the control module's and control module box's connectors do not have bent or damaged pins or sleeves. This may have be the cause of the problem.

Fig 2: Relay Box In Passenger Compartment/Cargo Compartment

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove all relays and shunts bridged to the control module. Note the locations.

Fig 3: Removing Control Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

Release the catch on the rear. Use a screwdriver.

Lift and pull out the control module.