Checking The Component And Wiring

Check the loudspeaker signal cable at control module connector A. Check for a short-circuit to ground.

Check between:

• terminals #20 (#20) and #18 (#18)
• terminals #20 (#20) and #6 (#6).

Try replacing the carphone handset if no fault is found in the wiring.

Remedy as necessary.

Other information: 

• see SIGNAL SPECIFICATION
• see CONNECTING THE BREAKOUT BOX
• see LOCATION OF COMPONENTS
• see PHONE MODULE (PHM) (2011)
• see TELEPHONE HANDSET (2011)
• see CONTENTS

Fig 2: Identifying Connector A Terminals

Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Ohms Display

Courtesy of VOLVO CARS CORPORATION

Fig 4: Identifying Handset Cradle

Courtesy of VOLVO CARS CORPORATION

Refer to VERIFICATION