Checking components and wiring: Notes
Check the cable that relates to the diagnostic trouble code (DTC). Check for an open-circuit.
Check between:
- Engine control module (ECM) terminal #A16 (#A16) and injector terminal #2 (ECM-200B, injector 1)
- Engine control module (ECM) terminal #A34 (#A34) and injector terminal #2 (ECM-201B, injector 2)
- Engine control module (ECM) terminal #A15 (#A15) and injector terminal #2 (ECM-202B, injector 3)
- Engine control module (ECM) terminal #A33 (#A33) and injector terminal #2 (ECM-203B, injector 4)
- Engine control module (ECM) terminal #A14 (#A14) and injector terminal #2 (ECM-204B, injector 5).
Remedy as necessary.
Other information
- See Connecting the breakout box
- For information about signals:
- For 5 cylinder turbocharged engines -2001, see Signal specification
- For 5 cylinder turbocharged engines 2002, see Signal specification
- For B5254T2 -2004, see Signal description
- For B5204T5, B5234T3, B5234T7 and B5244T3 -2004, see Signal specification (B5204T5, B5234T3, B5234T7 and B5244T3 -2004)
- For B5254T4 2004, see Signal specification (B5254T4 2004)
- For 5 cylinder turbocharged engines 2005-, see Signal specification .
- For B5xx4T -2002, see Injector/pulse damper, replacement
- For B5xx4T 2003-, see Injector/pulse damper, replacement
- For B5xx4Tx 2005-, see Injector/pulse damper, replacement .
- See Checking wiring and terminals
- Continue
Refer to Verification