Signal outside its permitted range: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reconnect the connectors, reinstall components etc.
• Test drive the car. See Test Drive Form (DSTC (dynamic stability and traction control) /brake control module), description
• Ignition on.

  Read off the status of the diagnostic trouble code (DTC).

  Fig 3: Identifying VCT2000 Diagnostic Tool

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the status of the diagnostic trouble code (DTC) intermittent? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information