Signal missing: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Connect the manometer, see Fuel pressure gauge
• Run the engine to operating temperature. Allow the engine to idle
• air conditioning (A/C) off
• Read off the relative fuel pressure.

  The relative fuel pressure is calculated from the fuel pressure sensor and the atmospheric pressure sensor signal (= absolute pressure minus atmospheric pressure).

  Check that the value on the manometer and the value displayed in VIDA are the same. If the values are different, this indicates incorrect function.

  Fig 2: Identifying VCT2000

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 3: Identifying Fuel Pressure Sensor

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the function OK? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information