Engine Control Module (ECM) Diagnostic Trouble Codes (DTC) - 6 Of 14

• ECM-3410: Rear Knock Sensor (KS), Signal Too Low (B5244S; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Reading off the status of the diagnostic trouble code (DTC)
      • Engine control module (ECM)
    • Preparation
      • Checking the wiring and component
      • Replacing the knock sensor (KS)
      • Intermittent fault
    • Verification
      • Verification
    • Information, fault-tracing has failed
      • Fault-tracing information, fault-tracing has failed
    • Information, fault does not recur
      • Fault-tracing information, fault does not recur
• ECM-341A: Knock Sensor (KS), Rear, Too Little Roar (B5244S; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-341A
  • Too-little: roar
    • Preparation
      • Checking components and connectors
    • Information
      • Fault-tracing information
• ECM-341A: Knock Sensor (KS), Rear, Too Little Roar (B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-341A
  • Too-little: roar
• ECM-341A: Rear Knock Sensor (KS), Too Little Roar (B5244S; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Too-little: roar
• ECM-341A: Rear Knock Sensor (KS), Too Much Roar (B5244S; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Too-much: roar
    • Preparation
      • Checking components and connectors
    • Information
      • Fault-tracing information
• ECM-341B: Camshaft Position (CMP) Sensor, Exhaust, Signal Missing (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
• ECM-341C: Camshaft Position Sensor, Exhaust, Signal Too High (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Preparation
      • Checking the status
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-341D: Camshaft Position Sensor, Exhaust, Signal Too Low (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Preparation
      • Checking the status
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3420: Knock Sensor (KS) Rear, Signal Too High, Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high, intermittent fault
    • Preparation
      • Checking connectors and wiring
    • Information
      • Fault-tracing information
• ECM-3420: Knock Sensor (KS) Rear, Signal Too High, Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high, intermittent fault
• ECM-3420: Knock Sensor (KS) Rear, Signal Too High, Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high, intermittent fault
• ECM-3420: Knock Sensor (KS) Rear, Signal Too High, Intermittent Fault (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high, intermittent fault
• ECM-3420: Knock Sensor (KS) Rear, Signal Too High, Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high, permanent fault
• ECM-3420: Knock Sensor (KS) Rear, Signal Too High, Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high, permanent fault
• ECM-3420: Knock Sensor (KS) Rear, Signal Too High, Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high, permanent fault
• ECM-3420: Knock Sensor (KS) Rear, Signal Too High, Permanent Fault (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high, permanent fault
• ECM-3420: Knock Sensor (KS) Rear, Signal Too Low, Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low, intermittent fault
    • Preparation
      • Checking wiring and connectors
    • Information
      • Fault-tracing information
• ECM-3420: Knock Sensor (KS) Rear, Signal Too Low, Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low, intermittent fault
• ECM-3420: Knock Sensor (KS) Rear, Signal Too Low, Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low, intermittent fault
• ECM-3420: Knock Sensor (KS) Rear, Signal Too Low, Intermittent Fault (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low, intermittent fault
• ECM-3420: Knock Sensor (KS) Rear, Signal Too Low, Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3420: Knock Sensor (KS) Rear, Signal Too Low, Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3420: Knock Sensor (KS) Rear, Signal Too Low, Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3420: Knock Sensor (KS) Rear, Signal Too Low, Permanent Fault (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-34E0: Knock Sensor (KS), Offset. Signal Too High/Signal Too Low, Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low, intermittent fault
• ECM-34E0: Knock Sensor (KS), Offset, Signal Too High/Signal Too Low, Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low, intermittent fault
• ECM-34E0: Knock Sensor (KS), Offset, Signal Too High/Signal Too Low, Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low, intermittent fault
• ECM-34E0: Knock Sensor (KS), Offset, Signal Too High/Signal Too Low, Intermittent Fault (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low, intermittent fault
• ECM-34E0: Knock Sensor (KS), Offset, Signal Too High/Signal Too Low, Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Permanent fault
• ECM-34E0: Knock Sensor (KS), Offset, Signal Too High/Signal Too Low, Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Permanent fault
• ECM-34E0: Knock Sensor (KS), Offset, Signal Too High/Signal Too Low, Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Permanent fault
• ECM-34E0: Knock Sensor (KS), Offset, Signal Too High/Signal Too Low, Permanent Fault (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Permanent fault
• ECM-34F0: Knock Sensor (KS), Test Pulse, Signal Too High/Signal Too Low, Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low, intermittent fault
• ECM-34F0: Knock Sensor (KS), Test Pulse, Signal Too High/Signal Too Low, Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low, intermittent fault
• ECM-34F0: Knock Sensor (KS), Test Pulse, Signal Too High/Signal Too Low, Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low, intermittent fault
• ECM-34F0: Knock Sensor (KS), Test Pulse, Signal Too High/Signal Too Low, Intermittent Fault (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low, intermittent fault
• ECM-34F0: Knock Sensor (KS), Test Pulse, Signal Too High/Signal Too Low, Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Permanent fault
• ECM-34F0: Knock Sensor (KS), Test Pulse, Signal Too High/Signal Too Low, Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Permanent fault
• ECM-34F0: Knock Sensor (KS), Test Pulse, Signal Too High/Signal Too Low, Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Permanent fault
• ECM-34F0: Knock Sensor (KS), Test Pulse, Signal Too High/Signal Too Low, Permanent Fault (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Permanent fault
• ECM-3502: Misfire, Emission Effect, Misfire CYL 1 (B5244S; 2005-2007)
  • Cylinder 1
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Emission Effect, Misfire CYL 1 (B5244S6; 2005-2006)
  • Cylinder 1
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Emission Effect, Misfire CYL 2 (B5244S; 2005-2007)
  • Cylinder 2
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Emission Effect, Misfire CYL 2 (B5244S6; 2005-2006)
  • Cylinder 2
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Emission Effect, Misfire CYL 3 (B5244S; 2005-2007)
  • Cylinder 3
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Emission Effect, Misfire CYL 3 (B5244S6; 2005-2006)
  • Cylinder 3
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Emission Effect, Misfire CYL 4 (B5244S; 2005-2007)
  • Cylinder 4
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Emission Effect, Misfire CYL 4 (B5244S6; 2005-2006)
  • Cylinder 4
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Emission Effect, Misfire CYL 5 (B5244S; 2005-2007)
  • Cylinder 5
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Emission Effect, Misfire CYL 5 (B5244S6; 2005-2006)
  • Cylinder 5
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Emission Effect, Misfire, At Least One Cylinder (B5244S; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-3502
  • Multiple cylinders
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3502: Misfire, Emission Effect, Misfire, At Least One Cylinder (B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-3502
  • Multiple cylinders
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3502: Misfire, Cylinder 1 (B5244S; 2001-2004)
  • Cylinder 1
    • Checking spark plugs
      • Checking spark plugs
      • Replacing all spark plugs
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Cylinder 1 (B5244S6; 2003-2004)
  • Cylinder 1
    • Checking spark plugs
      • Checking spark plugs
      • Replacing all spark plugs
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Cylinder 2 (B5244S; 2001-2004)
  • Cylinder 2
    • Checking spark plugs
      • Checking spark plugs
      • Replacing all spark plugs
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Cylinder 2 (B5244S6; 2003-2004)
  • Cylinder 2
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Cylinder 3 (B5244S; 2001-2004)
  • Cylinder 3
    • Checking spark plugs
      • Checking spark plugs
      • Replacing all spark plugs
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Cylinder 3 (B5244S6; 2003-2004)
  • Cylinder 3
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Cylinder 4 (B5244S; 2001-2004)
  • Cylinder 4
    • Checking spark plugs
      • Checking spark plugs
      • Replacing all spark plugs
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Cylinder 4 (B5244S6; 2003-2004)
  • Cylinder 4
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Cylinder 5 (B5244S; 2001-2004)
  • Cylinder 5
    • Checking spark plugs
      • Checking spark plugs
      • Replacing all spark plugs
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Cylinder 5 (B5244S6; 2003-2004)
  • Cylinder 5
  • Diagnostic trouble code (DTC) information ECM-3502
• ECM-3502: Misfire, Multiple Cylinders (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information ECM-3502
  • Multiple cylinders
    • Checking spark plugs
      • Checking spark plugs
      • Replacing all spark plugs
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3502: Misfire, Multiple Cylinders (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information ECM-3502
  • Multiple cylinders
    • Checking spark plugs
      • Checking spark plugs
      • Replacing all spark plugs
    • Preparation
      • Checking the fuel injection system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3503: Misfire, At Least One Cylinder (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-3503: Misfire, At Least One Cylinder, Emissions Impact / Catalytic Converter Damage (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-3503: Misfire, At Least One Cylinder, Emissions Impact / Catalytic Converter Damage (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-3503: Misfire, At Least One Cylinder, Emissions Impact / Catalytic Converter Damage (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-3503: Misfire, At Least One Cylinder, Emissions Impact / Catalytic Converter Damage (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-3503: Misfire, Catalytic Converter Damage, Misfire CYL 1 (B5244S; 2005-2007)
  • Cylinder 1
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Catalytic Converter Damage, Misfire CYL 1 (B5244S6; 2005-2006)
  • Cylinder 1
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Catalytic Converter Damage, Misfire CYL 2 (B5244S; 2005-2007)
  • Cylinder 2
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Catalytic Converter Damage, Misfire CYL 2 (B5244S6; 2005-2006)
  • Cylinder 2
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Catalytic Converter Damage, Misfire CYL 3 (B5244S; 2005-2007)
  • Cylinder 3
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Catalytic Converter Damage, Misfire CYL 3 (B5244S6; 2005-2006)
  • Cylinder 3
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Catalytic Converter Damage, Misfire CYL 4 (B5244S; 2005-2007)
  • Cylinder 4
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Catalytic Converter Damage, Misfire CYL 4 (B5244S6; 2005-2006)
  • Cylinder 4
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Catalytic Converter Damage, Misfire CYL 5 (B5244S; 2005-2007)
  • Cylinder 5
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Catalytic Converter Damage, Misfire CYL 5 (B5244S6; 2005-2006)
  • Cylinder 5
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Catalytic Converter Damage, Misfire, At Least One Cylinder (B5244S; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-3503
  • Multiple cylinders
• ECM-3503: Misfire, Catalytic Converter Damage, Misfire, At Least One Cylinder (B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-3503
  • Multiple cylinders
• ECM-3503: Misfire, Cylinder 1 (B5244S; 2001-2004)
  • Cylinder 1
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Cylinder 1 (B5244S6; 2003-2004)
  • Cylinder 1
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Cylinder 2 (B5244S; 2001-2004)
  • Cylinder 2
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Cylinder 2 (B5244S6; 2003-2004)
  • Cylinder 2
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Cylinder 3 (B5244S; 2001-2004)
  • Cylinder 3
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Cylinder 3 (B5244S6; 2003-2004)
  • Cylinder 3
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Cylinder 4 (B5244S; 2001-2004)
  • Cylinder 4
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Cylinder 4 (B5244S6; 2003-2004)
  • Cylinder 4
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Cylinder 5 (B5244S; 2001-2004)
  • Cylinder 5
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Cylinder 5 (B5244S6; 2003-2004)
  • Cylinder 5
  • Diagnostic trouble code (DTC) information ECM-3503
• ECM-3503: Misfire, Multiple Cylinders (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information ECM-3503
  • Multiple cylinders
• ECM-3503: Misfire, Multiple Cylinders (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information ECM-3503
  • Multiple cylinders
• ECM-350B: Ignition Coil Cylinder 1, Signal, Signal Missing (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Preparation
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-350C: Ignition Coil Cylinder 1, Signal, Signal Too High (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Preparation
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-350D: Ignition Coil Cylinder 1, Signal, Signal Too Low (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Preparation
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3513: Misfire Cylinder 1, Emissions Impact / Catalytic Converter Damage (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
    • Preparation
      • Checking the fuel injection system, ignition system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
    • Emissions impact / catalytic converter damage
      • Checking the fuel injection system, ignition system and components
      • Verification
      • Fault-tracing information
• ECM-3513: Misfire Cylinder 1, Emissions Impact / Catalytic Converter Damage (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3513: Misfire Cylinder 1, Emissions Impact / Catalytic Converter Damage (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3513: Misfire Cylinder 1, Emissions Impact / Catalytic Converter Damage (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3513: Misfire, Faulty Signal (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Preparation
      • Checking fuel injection system, ignition system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-351B: Ignition Coil Cylinder 2, Signal, Signal Missing (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-351C: Ignition Coil Cylinder 2, Signal, Signal Too High (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-351D: Ignition Coil Cylinder 2, Signal, Signal Too Low (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-3523: Misfire Cylinder 2, Emissions Impact / Catalytic Converter Damage (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3523: Misfire Cylinder 2, Emissions Impact / Catalytic Converter Damage (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3523: Misfire Cylinder 2, Emissions Impact / Catalytic Converter Damage (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3523: Misfire Cylinder 2, Emissions Impact / Catalytic Converter Damage (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3523: Misfire, Faulty Signal (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-352B: Ignition Coil Cylinder 3, Signal, Signal Missing (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-352C: Ignition Coil Cylinder 3, Signal, Signal Too High (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-352D: Ignition Coil Cylinder 3, Signal, Signal Too Low (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-3533: Misfire Cylinder 3, Emissions Impact / Catalytic Converter Damage (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3533: Misfire Cylinder 3, Emissions Impact / Catalytic Converter Damage (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3533: Misfire Cylinder 3, Emissions Impact / Catalytic Converter Damage (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3533: Misfire Cylinder 3, Emissions Impact / Catalytic Converter Damage (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3533: Misfire, Faulty Signal (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-353B: Ignition Coil Cylinder 4, Signal, Signal Missing (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-353C: Ignition Coil Cylinder 4, Signal, Signal Too High (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-353D: Ignition Coil Cylinder 4, Signal, Signal Too Low (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-3543: Misfire Cylinder 4, Emissions Impact / Catalytic Converter Damage (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3543: Misfire Cylinder 4, Emissions Impact / Catalytic Converter Damage (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3543: Misfire Cylinder 4, Emissions Impact / Catalytic Converter Damage (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3543: Misfire Cylinder 4, Emissions Impact / Catalytic Converter Damage (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3543: Misfire, Faulty Signal (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-354B: Ignition Coil Cylinder 5, Signal, Signal Missing (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-354C: Ignition Coil Cylinder 5, Signal, Signal Too High (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-354D: Ignition Coil Cylinder 5, Signal, Signal Too Low (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-3553: Misfire Cylinder 5, Emissions Impact / Catalytic Converter Damage (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3553: Misfire Cylinder 5, Emissions Impact / Catalytic Converter Damage (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3553: Misfire Cylinder 5, Emissions Impact / Catalytic Converter Damage (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3553: Misfire Cylinder 5, Emissions Impact / Catalytic Converter Damage (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / catalytic converter damage
• ECM-3553: Misfire, Faulty Signal (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Missing, Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing, intermittent fault
    • Preparation
      • Checking wiring and connectors
    • Information
      • Fault-tracing information
• ECM-4000: Canister Purge (Cp) Valve, Signal Missing, Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing, intermittent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Missing, Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing, intermittent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Missing, Intermittent Fault (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing, intermittent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Missing, Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Preparation
      • Checking the connector
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-4000: Canister Purge (Cp) Valve, Signal Missing, Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Missing, Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Missing, Permanent Fault (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Too High (B5244S; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Preparation
      • Checking for intermittent faults
      • Checking the connector
      • Checking the wiring and component
      • Replacing the EVAP canister shut-off valve
      • Fault-tracing information
    • Information, fault does not recur
      • Fault-tracing information
    • Verification
      • Verification
    • Information, fault-tracing has failed
      • Fault-tracing information
• ECM-4000: Canister Purge (Cp) Valve, Signal Too High (B5244S; 2003-2007)
  • Diagnostic trouble code (DTC) information ECM-4000
  • Signal too high
    • Preparation
      • Checking for intermittent faults
      • Checking the connector
      • Checking the wiring and component
      • Replacing the EVAP canister shut-off valve
      • Fault-tracing information
    • Information, fault does not recur
      • Fault-tracing information, fault does not recur
    • Verification
      • Verification
    • Information, fault-tracing has failed
      • Fault-tracing information, fault-tracing has failed
• ECM-4000: Canister Purge (Cp) Valve, Signal Too High (B5244S6; 2003-2006)
  • Diagnostic trouble code (DTC) information ECM-4000
  • Signal too high
• ECM-4000: Canister Purge (Cp) Valve, Signal Too High, Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high, intermittent fault
    • Preparation
      • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-4000: Canister Purge (Cp) Valve, Signal Too High, Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high, intermittent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Too High, Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high, intermittent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Too High, Intermittent Fault (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high, intermittent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Too High, Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high, permanent fault
    • Preparation
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-4000: Canister Purge (Cp) Valve, Signal Too High, Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high, permanent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Too High, Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high, permanent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Too High, Permanent Fault (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high, permanent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Too Low (B5244S; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Preparation
      • Checking for intermittent faults
      • Checking the wiring and component
      • Replacing the canister purge (CP) valve
      • Fault-tracing information
    • Information, fault does not recur
      • Fault-tracing information, fault does not recur
    • Verification
      • Verification
    • Information, fault-tracing has failed
      • Fault-tracing information, fault-tracing has failed
• ECM-4000: Canister Purge (Cp) Valve, Signal Too Low (B5244S; 2003-2007)
  • Diagnostic trouble code (DTC) information ECM-4000
  • Signal too low
    • Preparation
      • Checking for intermittent faults
      • Checking the wiring and component
      • Replacing the canister purge (CP) valve
      • Fault-tracing information
    • Information, fault does not recur
      • Fault-tracing information, fault does not recur
    • Verification
      • Verification
    • Information, fault-tracing has failed
      • Fault-tracing information, fault-tracing has failed
• ECM-4000: Canister Purge (Cp) Valve, Signal Too Low (B5244S6; 2003-2006)
  • Diagnostic trouble code (DTC) information ECM-4000
  • Signal too low
• ECM-4000: Canister Purge (Cp) Valve, Signal Too Low, Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low, intermittent fault
    • Preparation
      • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-4000: Canister Purge (Cp) Valve, Signal Too Low, Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low, intermittent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Too Low, Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low, intermittent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Too Low, Intermittent Fault (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low, intermittent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Too Low, Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking
      • Checking components and wiring
    • Preparation
      • Verification
    • Information
      • Fault-tracing information
• ECM-4000: Canister Purge (Cp) Valve, Signal Too Low, Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Too Low, Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-4000: Canister Purge (Cp) Valve, Signal Too Low, Permanent Fault (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-4007: Evaporative Emission (EVAP) System, Signal Too High (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Preparation
      • Checking the component
    • Information
      • Fault-tracing information
• ECM-4007: Evaporative Emission (EVAP) System, Signal Too High (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-4007: Evaporative Emission (EVAP) System, Signal Too High (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-4007: Evaporative Emission (EVAP) System, Signal Too High (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-4007: Evaporative Emission (EVAP) System, Signal Too Low (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Preparation
      • Checking the component
    • Information
      • Fault-tracing information
• ECM-4007: Evaporative Emission (EVAP) System, Signal Too Low (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-4007: Evaporative Emission (EVAP) System, Signal Too Low (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-4007: Evaporative Emission (EVAP) System, Signal Too Low (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-4008: Canister Purge (Cp) Valve, Leakage (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Leak diagnostic
    • Preparation
      • Safety
      • Checking wiring and terminals
      • General information about testing the fuel tank system
      • Leak diagnostic
      • Checking the engine coolant temperature (ECT)
      • Starting the test of the fuel tank system
      • Checking the cause of a fault using quick test
      • Checking for blockage between the fuel tank pressure sensor and the fuel tank
    • Large leak
      • Checking the vacuum downstream of the canister purge (CP) valve
      • Checking the vacuum at the EVAP canister
      • Checking the canister purge (CP) valve vacuum
      • Replacing the canister purge (CP) valve
      • Checking the EVAP canister
      • Checking the hose
      • Checking the hose between the fuel tank and the EVAP canister
      • Test pressurization of the fuel tank system
      • Checking the fuel tank pressure sensor
      • Checking the hose to the EVAP canister shut-off valve
      • Checking the fuel tank pressure sensor hose
      • Replacing the fuel tank pressure sensor
      • Replacing the EVAP canister shut-off valve
      • Checking the fuel tank system
    • Small leak
      • Test pressurization of the fuel tank system
      • Checking the hose to the EVAP canister shut-off valve
      • Replacing the EVAP canister shut-off valve
      • Checking the fuel tank system
    • Verification information
      • Verification information
    • Leakage
      • Checking the vacuum downstream of the canister purge (CP) valve
      • Checking the canister purge (CP) valve
    • Flow fault
      • Checking the fuel tank pressure sensor
      • Checking the canister purge (CP) valve
      • Checking hoses
    • Leak diagnostic
• ECM-4008: Canister Purge (Cp) Valve, Leakage (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Leak diagnostic
• ECM-400A: Canister Purge (Cp) Valve, Faulty Signal (B5244S; 2003-2007)
  • Diagnostic trouble code (DTC) information ECM-400A
  • Faulty signal
    • Preparation
      • Checking components and connections
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-400A: Canister Purge (Cp) Valve, Faulty Signal (B5244S6; 2003-2006)
  • Diagnostic trouble code (DTC) information ECM-400A
  • Faulty signal
• ECM-400C: Fuel Tank System, Leakage (B5234T3 ; B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Leakage
    • Preparation
      • Checking other diagnostic trouble codes (DTCs)
      • Checking the status
      • Test phases
      • Checking components
      • Activating the quick test of the fuel tank system
      • Checking the EVAP canister purge valve
      • Replacing the EVAP canister purge valve
      • Checking the fuel tank system
      • Replacing the leak diagnostic unit
      • Fault-tracing information:
      • Intermittent fault
    • Verification
      • Verification
      • Test phases
    • Information
      • Fault-tracing information
• ECM-400C: Fuel Tank System, Leakage (B5234T3; B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Leakage
    • Checking software
    • Perform quick-test tank system
    • DMTL, test result = "Problem found"
    • Tank system, test result = "No leakage found"
    • Tank system, test result = "Minor leakage found"
    • DMTL, test result and Tank system, test result = "Unknown"
    • Tank system, test result = "Major leakage found"
• ECM-400C: Fuel Tank System, Leakage (B5244T3; 2003)
  • Diagnostic trouble code (DTC) information
  • Leakage
• ECM-400C: Fuel Tank System, Leakage (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Leakage
• ECM-400C: Three-Way Catalytic Converter (TWC) Efficiency, Bank 1, Signal Too High (B5244T5; B5254T2; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-400C
  • Signal too high
    • Preparation
      • Checking the components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-4010: EVAP Canister Shut-Off Valve, Faulty Signal (B5244S; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Preparation
      • Checking for intermittent fault
      • Checking connector (resistance)
      • Checking connector (activating EVAP canister shut-off valve)
      • Checking wiring and components
      • Replacing EVAP canister shut-off valve
      • Fault-tracing information
    • Information, fault does not recur
      • Fault-tracing information, fault does not recur
    • Verification
      • Verification
    • Information, fault-tracing has failed
      • Fault-tracing information, fault-tracing has failed
• ECM-4010: EVAP Canister Shut-Off Valve, Signal Missing, Intermittent Fault (B5234T3; B5244T3; 2001)
  • Signal missing, intermittent fault
    • Preparation
      • Checking the wiring and connectors
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information
• ECM-4010: EVAP Canister Shut-Off Valve, Signal Missing, Permanent Fault (B5234T3; B5244T3; 2001)
  • Signal missing. Permanent fault
    • Preparation
      • Checking the connector
      • Checking the components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information
• ECM-4010: EVAP Canister Shut-Off Valve, Signal Too High, Intermittent Fault (B5234T3; B5244T3; 2001)
  • Signal too high, intermittent fault
    • Preparation
      • Checking the wiring
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information
• ECM-4010: EVAP Canister Shut-Off Valve, Signal Too High, Permanent Fault (B5234T3; B5244T3; 2001)
  • Signal too high, permanent fault
    • Preparation
      • Checking the components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information
• ECM-4010: EVAP Canister Shut-Off Valve, Signal Too Low, Intermittent Fault (B5234T3; B5244T3; 2001)
  • Signal too low, intermittent fault
    • Preparation
      • Checking the wiring
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information
• ECM-4010: EVAP Canister Shut-Off Valve, Signal Too Low, Permanent Fault (B5234T3; B5244T3; 2001)
  • Signal too low. Permanent fault
    • Preparation
      • Checking the components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information
• ECM-4010: Leak Diagnostic Unit, Valve, Signal Missing (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Preparation
      • Checking the status
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-4010: Leak Diagnostic Unit, Valve, Signal Missing (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-4010: Leak Diagnostic Unit, Valve, Signal Missing (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-4010: Leak Diagnostic Unit, Valve, Signal Missing (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-4010: Leak Diagnostic Unit, Valve, Signal Too High (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Preparation
      • Checking the status
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-4010: Leak Diagnostic Unit, Valve, Signal Too High (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-4010: Leak Diagnostic Unit, Valve, Signal Too High (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-4010: Leak Diagnostic Unit, Valve, Signal Too High (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-4010: Leak Diagnostic Unit, Valve, Signal Too Low (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Preparation
      • Checking the status
      • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-4010: Leak Diagnostic Unit, Valve, Signal Too Low (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-4010: Leak Diagnostic Unit, Valve, Signal Too Low (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-4010: Leak Diagnostic Unit, Valve, Signal Too Low (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-4019: EVAP Canister Shut-Off Valve, Flow Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
• ECM-401C: Three-Way Catalytic Converter (TWC) Efficiency, Bank 2, Signal Too High (B5244T5; B5254T2; B5254T4; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-401C
  • Signal too high
    • Preparation
      • Checking the components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-4020: Fuel Tank Pressure Sensor, Faulty Signal, Intermittent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal, intermittent fault
    • Preparation
      • Checking the connector
    • Information
      • Fault-tracing information
• ECM-4020: Fuel Tank Pressure Sensor, Faulty Signal, Permanent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal, permanent fault
    • Preparation
      • Checking the connector
      • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-4020: Fuel Tank Pressure Sensor, Signal Too High (B5244S; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Reading off the status of the diagnostic trouble code (DTC)
      • Engine control module (ECM)
    • Preparation
      • Checking the wiring and component
    • Signal too high, intermittent fault
      • Checking cables and connectors
    • Information, fault does not recur
      • Fault-tracing information, fault does not recur
    • Verification
      • Verification
    • Information, fault-tracing has failed
      • Fault-tracing information, fault-tracing has failed
• ECM-4020: Fuel Tank Pressure Sensor, Signal Too High, Intermittent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high, intermittent fault
    • Preparation
      • Checking cables
    • Information
      • Fault-tracing information
• ECM-4020: Fuel Tank Pressure Sensor, Signal Too High, Intermittent Fault (B5244S; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high, intermittent fault
    • Preparation
      • Checking cables and connectors
    • Information
      • Fault-tracing information
• ECM-4020: Fuel Tank Pressure Sensor, Signal Too High, Permanent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high, permanent fault
    • Preparation
      • Checking the connector
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-4020: Fuel Tank Pressure Sensor, Signal Too Low (B5244S; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Reading off the status of the diagnostic trouble code (DTC)
      • Engine control module (ECM)
    • Preparation
      • Checking the wiring and component
    • Signal too low, intermittent fault
      • Checking wiring and connectors
    • Information, fault does not recur
      • Fault-tracing information, fault does not recur
    • Verification
      • Verification
    • Information, fault-tracing has failed
      • Fault-tracing information, fault-tracing has failed
• ECM-4020: Fuel Tank Pressure Sensor, Signal Too Low, Intermittent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low, intermittent fault
    • Preparation
      • Checking cables
    • Information
      • Fault-tracing information
• ECM-4020: Fuel Tank Pressure Sensor, Signal Too Low, Intermittent Fault (B5244S; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low, intermittent fault
    • Preparation
      • Checking wiring and connectors
    • Information
      • Fault-tracing information
• ECM-4020: Fuel Tank Pressure Sensor, Signal Too Low, Permanent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low, permanent fault
    • Preparation
      • Checking the connector
      • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information