LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2007 >> V70 Base, 2.4 64 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine, Fuel & Ignition Control Systems - Removal & Installation, Specifications >> Ignition And Control Systems >> Variable Valve Timing Unit, Checking And Adjusting (B5234T3; B5244T3; 2001) >> Installing And Adjusting The Variable Valve Timing Unit/Gear Pulley On The Camshafts. >> Installing The Crankshaft Adjustment Tool

Installing The Crankshaft Adjustment Tool

Remove the starter motor mounting screws. Pull out the starter motor and put it aside.

Remove the blind cover plug from the hole for the adjustment tool.

Turn the crankshaft clockwise  slightly.

Install: 9995451 . Ensure that the tool bottoms out against the cylinder block.

scientia non olet · About LEMON Manuals