Checking components and connections

Check the signal cable from engine control module (ECM) terminal #A59 (#A59) to fuel temperature sensor terminal #2. Check for an open-circuit. Check for a short-circuit to ground.

Remedy as necessary.

Other information: 

• To connect the breakout box, see Connecting the breakout box
• For information about signals, see Signal specification
• To access the fuel temperature sensor, see Location of components
• To fault-trace the wiring and terminals, see Contents .

Fig 1: Identifying 4-Bit Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Verification