Calibrating The Position Sensor In The Transmission Control Module (TCM)

Fig 1: Identifying Ignition ON

GLL101051

Courtesy of VOLVO CARS OF NORTH AMERICA.

Check that the transmission cable is correctly adjusted. Adjust if necessary
Ignition on
Place the gear selector lever in neutral position (N).
Activate calibration of the position sensor in the transmission control module (TCM) by clicking on the VCT2000 symbol.

Other information
- see GEAR SELECTOR CABLE, ADJUSTING
Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Control Module/Gear-Shift Position Sensor
Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
Refer to VERIFICATION