Checking The Transmission Connectors

Check the connector (gear selector assembly). Check for bent or pressed in pins.

Check the power supply cable between gear selector module (GSM) terminal #1 and transmission control module (TCM) terminal #16 (#A46). Check for an open-circuit. Check for a short-circuit to ground.

Remedy as necessary.

Other information 

• To remove the gear selector's connector, see PRINTED CIRCUIT BOARD GEAR SELECTOR ASSEMBLY
• see CONTENTS
• see SIGNAL SPECIFICATION

Fig 2: Identifying Ohms Display

Courtesy of VOLVO CARS OF NORTH AMERICA.

Refer to VERIFICATION