Checking The Component And Wiring

Fig 1: Identifying Ignition In Off Position

GLL101046

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Connectors

GLL101072

Courtesy of VOLVO CARS CORPORATION

Ignition off.
Disconnect the fuel temperature sensor connector.
Check the connectors. Check for loose connections. Check for contact resistance. Check for oxidation.
Check the resistance of the sensor between #1 and #2 (to the sensor).

Remedy as necessary.

Other information
- see CONNECTING THE BREAKOUT BOX
- see SIGNAL SPECIFICATION
- see COMPONENT SPECIFICATIONS
- see PRESSURE SENSOR, FUEL RAIL (FRP)
- see CHECKING WIRING AND TERMINALS
Fig 3: Identifying 4-Bit Connector
Courtesy of VOLVO CARS CORPORATION

Fig 4: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
Courtesy of VOLVO CARS CORPORATION

Fig 5: Identifying Fuel Pressure Sensor
Courtesy of VOLVO CARS CORPORATION

Continue
Refer to VERIFICATION