Checking The Component And Wiring

Check the cable between engine control module (ECM) terminal #A63 (#B3) and mass air flow (MAF) sensor terminal #5. Check for a short-circuit to supply voltage.

Check the ground lead between engine control module (ECM) terminal #A62 (#B2) and mass air flow (MAF) sensor terminal #3. Check for an open-circuit.

Remedy as necessary.

Other information 

• see CONNECTING THE BREAKOUT BOX
• see SIGNAL SPECIFICATION
• The air flow reading from the mass air flow (MAF) sensor must be 0 kg/h with the engine switched off and ignition on
• see MASS AIR FLOW (MAF) SENSOR
• see CHECKING WIRING AND TERMINALS

Fig 1: Identifying Connector

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Mass Air Flow (MAF) Sensor

Courtesy of VOLVO CARS CORPORATION

• Continue 

  Refer to VERIFICATION