Signal Specification

General

All the values given below are between the terminals stated in column 1 and terminal #A8 in column 2 (power ground). This applies unless otherwise indicated in brackets.

NOTE:

It is important to connect the breakout box and check the ground connections before measuring.

U=	DC voltage in volts (V)	U_low =	Voltage approximately 0 V
U_bat =	Battery voltage (V)

Connector A

Fig 1: Identifying Signal Table Connector A

Courtesy of VOLVO CARS CORPORATION

SIGNAL TABLE CONNECTOR A

Connection breakout box	Control module terminal	Signal type	Ignition on	Miscellaneous
#1	#A1	Power supply	U = U_bat	-
#2	#A2	Control signal ring break	-	-
#3	#A3	Loudspeaker right rear door (+)	Analog output signal when the loudspeaker is in use	0 - 19 V depending on the output from the Integrated Audio Module (IAM). Impedance loudspeaker = 4 Ω
#4	#A4	Loudspeaker right front door (+)	Analog output signal when the loudspeaker is in use	0 - 19 V depending on the output from the Integrated Audio Module (IAM). Impedance loudspeaker = 4 Ω
#5	#A5	Loudspeaker left front door (+)	Analog output signal when the loudspeaker is in use	0 - 19 V depending on the output from the Integrated Audio Module (IAM). Impedance loudspeaker = 4 Ω
#6	#A6	Loudspeaker left rear door (+)	Analog output signal when the loudspeaker is in use	0 - 19 V depending on the output from the Integrated Audio Module (IAM). Impedance loudspeaker = 4 Ω
#7	#A7	AUX input, left channel	-	Not (model year 2007)
#8	#A8	Ground	U=U_low	-
#9	#A9	AUX input, right channel	-	Not (model year 2007)
#10	#A10	Loudspeaker right rear door (-)	Analog output signal when the loudspeaker is in use	0 - 19 V depending on the output from the Integrated Audio Module (IAM). Impedance loudspeaker = 4 Ω
#11	#A11	Loudspeaker right front door (-)	Analog output signal when the loudspeaker is in use	0 - 19 V depending on the output from the Integrated Audio Module (IAM). Impedance loudspeaker = 4 Ω
#12	#A12	Loudspeaker left front door (-)	Analog output signal when the loudspeaker is in use	0 - 19 V depending on the output from the Integrated Audio Module (IAM). Impedance loudspeaker = 4 Ω
#13	#A13	Loudspeaker left rear door (-)	Analog output signal when the loudspeaker is in use	0 - 19 V depending on the output from the Integrated Audio Module. Impedance loudspeaker = 4 Ω
#14	#A14	AUX-input, ground	-	Not (model year 2007)

Connector B

Fig 2: Identifying Connector B

Courtesy of VOLVO CARS CORPORATION

SIGNAL TABLE, CONNECTOR B

Terminal	Signal type	Miscellaneous
#B1	MOST input signal	Optical input signal when the MOST network is activated
#B2	MOST output signal	Optical output signal when the MOST network is activated

Connector C

Fig 3: Identifying Connector C

Courtesy of VOLVO CARS CORPORATION

SIGNAL TABLE, CONNECTOR C

Terminal	Signal type	Ignition on	Miscellaneous
#C1	Antenna signal	-	Input signal FM Subantenna Phantom power supply for the antenna amplifier(11.0 V ±0.5 V at 13.5 V battery voltage)
#C2	Antenna signal	-	Input signal AM/FM Main antenna