Checking the Wiring
There is either a fault in the supply voltage or in the ground lead. Check the power supply cable against a ground terminal (the chassis).
HINT: If the voltage is 12 V the fault is in the ground lead. Other wise the fault is in the power supply cable.
Remedy as necessary.
Other information:
- To access or replace the control module, see Interior Lighting And Upper Electronic Module (UEM), Replacing
- See Rain Sensor
- For further information about signals and other values, see Signal Specification
- To connect the breakout box, see Connecting the Breakout Box
- To fault-trace the wiring and terminals, see Checking Wiring And Terminals .
- Continue
Refer to Verification