LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2007 >> S60 Base, FWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Central Electronic Module (CEM), Rear Electronic Module (Rem), Upper Electronics Module (UEM) - Diagnostic Trouble Codes - 12 Of 13 >> Rem-8F13: Bi-Xenon Lamp Position Sensor. Calibration Fault (2004) >> Calibration fault >> Calibrating the component

Calibrating the component

Fig 1: Identifying Ignition ON
GLL101051Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE:

If the vehicle is equipped with Four-C, calibration must be carried out via suspension module (SUM).

Check that the position sensor for the Bi-Xenon lamps is correctly installed.

Someone must sit in the driver's seat during calibration. The person must weigh at least 75 kg. Ensure that the vehicle is unladen and is on a flat surface.

Calibrate the position sensor for the Bi-Xenon lamps again.

Other information 

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
GLL100563Courtesy of VOLVO CARS OF NORTH AMERICA.
scientia non olet · About LEMON Manuals