LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2007 >> S60 Base, FWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Central Electronic Module (CEM), Rear Electronic Module (Rem), Upper Electronics Module (UEM) - Diagnostic Trouble Codes - 8 Of 13 >> CEM-8A32: High Beam Flash. Activated Too Long (2005-2009) >> Activated too long >> Checking Control >> Checking Control

Checking Control

The diagnostic trouble code (DTC) is stored when the button or switch has been pressed in for too long or is in a non-approved position.

If the fault is intermittent, it has been registered previously but is no longer present. Intermittent faults can be caused by interference at start up or can be a different type of fault which occurs on different occasions. The fault is evaluated depending on how it occurs.

Check that the button or the switch is not sticking, jammed in the activated position or in a non-approved position.

Remedy as necessary.

Other information 

See Switches lights, replacing

scientia non olet · About LEMON Manuals