Replacing A Component

Fig 1: Identifying Ignition In Off Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
  CAUTION:

  Avoid touching the pins in the control module and the corresponding connector on the cable harness. There is a risk of static discharge which could damage the control module. Discharge yourself and tools to be used by holding the tool's metal part and touching a body part on the car just before starting to work.

  Replace the engine cooling fan (FC) control module if the engine cooling fan (FC) cannot be activated at all speeds and no faults have been found on wiring and connections.

  Remedy as necessary.

  Other information 

  • See Engine cooling fan (FC), replacing
  Fig 3: Identifying Engine Fan Control Module

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Select "Continue" when the fault has been remedied. 

• Continue 

  Refer to Verification